The 1700 Flow Meter Transmitter is a sophisticated and integral device in the realm of flow measurement and industrial process control. It is engineered to work in tandem with Coriolis flow meters, offering precise and reliable measurements of mass flow and other related parameters. This transmitter is a product of advanced engineering, combining functionality, durability, and user - friendly features, making it a preferred choice across various industries.
The 1700 Flow Meter Transmitter features a robust housing, typically made of polyurethane - painted cast aluminum or CF3M stainless steel, providing excellent protection against environmental factors. It adheres to the NEMA 4X (IP 66) standard, which means it is dust - tight and protected against powerful water jets. This rugged construction ensures the transmitter can operate reliably in harsh industrial environments, whether it's in a chemical plant with corrosive substances or an oil refinery with high temperatures and vibrations.
In terms of physical dimensions and weight, the painted aluminum version with a 4 - wire remote connection weighs approximately 8 lb (4 kg) when equipped with a display and 7 lb (3 kg) without a display. The 9 - wire remote - connected painted aluminum models weigh 14 lb (6 kg) with a display and 13 lb (6 kg) without. The stainless - steel versions, which are always remotely mounted, weigh 21 lb (10 kg) with a display and 20 lb (9 kg) without. These weight variations are important considerations for installation and handling in different industrial setups.
Features
- Powered by MVD (Multi - Variable Digital) technology, the 1700 Flow Meter Transmitter operates based on the principles of motion mechanics, specifically the Coriolis effect. When the process fluid enters the sensor, it is split. A drive coil stimulates the tubes to oscillate in opposition at the natural resonant frequency. As the tubes oscillate, the voltage generated from each pickoff creates a sine wave. The time delay between the two sine waves, known as delta - t, is directly proportional to the mass flow rate. This technology enables accurate measurement of mass flow, volume flow, and other related parameters, providing a reliable data source for industrial process control.
Product Overview
Flow Measurement Capabilities
The primary function of the 1700 Flow Meter Transmitter is to accurately measure mass flow and volume flow. It can measure flow rates over a wide range, from a few grams per hour up to 120,000 lbs per minute, depending on the specific sensor and application. This wide dynamic range is due to the linear nature of the signal created during the flow measurement process. It is highly accurate in measuring the flow of various substances, including liquids, gases, and slurries, making it suitable for a multitude of industries such as oil and gas, water and wastewater, power, chemical, food and beverage, and life sciences.
User - Friendly Interface
The transmitter is equipped with a user - friendly interface. It includes a two - line LCD display that provides clear and concise information about the measured parameters, device status, and any error messages. Two optical switches are provided for local operation, allowing for easy navigation and configuration of the transmitter without the need for additional tools. There are also options for either a glass or plastic lens for the display, depending on the user's preference and environmental requirements.
Mounting Flexibility
The 1700 Flow Meter Transmitter offers integral or remote mounting options. It can be integrally mounted to a Micro Motion F - series, R - series, or H - series sensor, providing a compact and streamlined installation. Alternatively, it can be remotely mounted to any 4 - wire or 9 - wire Micro Motion Coriolis sensor, which is beneficial in situations where the sensor needs to be placed in a hard - to - reach location or where a more distributed control system is preferred. The stainless - steel versions are always remotely mounted, ensuring proper installation and protection in various industrial setups.
Diagnostic and Verification Features
With MVD digital processing, the transmitter can receive diagnostics for performance under entrained gas and batching from empty applications. It also supports smart meter verification, which provides a quick and complete assessment of a Micro Motion Coriolis meter. This verification can determine whether the meter has been affected by erosion, corrosion, or other influences affecting meter calibration. The best part is that no secondary references are required to perform this operation, and the meter can continue normal process measurement while the test is in progress.
| Place of Origin |
USA |
Flow Rate |
0.5-12m/s |
| Measurement Range |
0.5-12m/s |
Material |
Stainless Steel |
| Medium |
Water, Oil, liquid, Gas, air |
Connectivity |
Flange |
| Warranty |
1 Year |
Customized support |
OEM, ODM |
| Brand Name |
rosemounte |
Model Number |
1700 |
| Place of Origin |
USA |
Customized support |
OEM ODM OBM |
| Brand Name |
ROSEMOUNTE |
Model Number |
1700 |
| Material |
stainless steels |
Warranty |
12 Month |
| Storage |
-40 to +158 °F -40 to +70 °C |
Display mode |
LCD display |
| Ambient temperature |
-10~80ºC |
Accuracy level |
0.05% |
Carton Boxes
KeRui (Weifang) Automation Equipment Co., Ltd.Specializes in industrial automation instrument development, production and sales, technical services, and supporting equipment supply to specialized companies. The main products are flow meters, level meters, temperature meters, pressure meters, electrical meters, thermal intelligent meters, programmable controllers (PLC), DCS distributed control systems, and eight series of more than 1,000 specifications. Its products and technologies are widely used in electric power, metallurgy, petrochemicals, environmental protection, plastics, food, printing, tobacco, textile, dyeing, and other fields.
1.Q: How long is the delivery?
-- Mostly within 10days
2.Q:Can I get a sample?
-- Sure, contact our sales please
3.Q:What is your MOQ?
-- 1pcs
4.Q: How about warranty time?
-- 12month
5.Q: How can I visit your factory?
-- Fly to Qingdao air port, it's our pleasure to pick you up.
6.Q:How do you control your quality ?
-- We have EPR system .we control from parts, process, testing, packing ,retesting.
Every Sensor will be tested two times before reach you, after that sport test for the third time. Make sure about the quantity.
Audited Supplier 
){kind=link}