Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Warranty: | 1 Year |
Still deciding? Get samples of $ !
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Attribute | Description |
Product Name | Proline Cubemass C300 |
Type | Coriolis Mass Flowmeter |
Manufacturer | Endress+Hauser |
Measurement Principle | Coriolis Force |
Max. Measurement Error | Mass Flow (Liquid): ±0.10%, Volume Flow (Liquid): ±0.10%, Mass Flow (Gas): ±0.50% |
Density Accuracy | ±0.0005 g/cm³ |
Measurement Range | 0...70,000 kg/h (0...2570 lb/min) |
Media Temperature Range | Tantalum: –50...+150 °C, Zirconium: –50...+205 °C |
Steps | Instructions |
1. Setup | Ensure the flowmeter is correctly installed in the system. Connect the flowmeter to the process fluid using appropriate piping and fittings. |
2. Wiring | Connect the flowmeter's electrical connections to a power source and to any required data acquisition or control systems. Follow the wiring diagram provided in the manual. |
3. Configuration | Use the configuration software to set up the flowmeter's parameters, such as measurement range, units, and communication settings. This can be done via a local interface or remotely. |
4. Calibration | Calibrate the flowmeter using a known flow rate to ensure accurate measurements. Follow the calibration procedures outlined in the manual. |
5. Operation | Start the process fluid flowing through the flowmeter. Monitor the flow rate and other measured parameters using the display or via a connected data acquisition system. |
6. Maintenance | Regularly inspect the flowmeter for signs of wear or damage. Clean and maintain the flowmeter as needed, following the maintenance procedures outlined in the manual. |
7. Troubleshooting | If the flowmeter malfunctions, refer to the troubleshooting section in the manual for possible causes and solutions. If the problem persists, contact Endress+Hauser technical support. |