Basic Info.
Adjusted Form
Switching Type
Work Temperature
High Temperature
Acting Type
Double Acting
Item Name
DVC6200 Digital Valve Controller
Communication Protocol
4-20 Ma Hart
Mounting Typeintegral
Mounted
Operating Temperature
Standard Temperature, High Temperature
Sub-Type
Digital Valve Controllers
Position Control
Throttling Control, on/off
Process Control
Flow, Pressure, Temperature, Level
Supply Media
Air, Natural Gas, Nitrogen
Transport Package
Carton Boxes
Product Description
Product Description
FISHER DVC 6200 SIS (DVC6215,DVC6205) DVC6200,DVC6200P,DVC6200F, DVC2000FISHER FIELDVUE DVC6200 Digital Valve Controllers
The FIELDVUE DVC6200 digital valve controller is a HART_ communicating instrument that converts a two‐wire 4‐20 mA control signal into a pneumatic output to an actuator. It can easily be retrofitted in place of existing analog positioners on most FISHER and non‐FISHER pneumatic actuators.
Features & Benefits
Linkageless feedback for non-friction moving parts
Vibration, temperature and corrosion resistant
Accurate and responsive
Easy maintenance
FISHER FIELDVUE™ DVC6200 digital valve controllers are HART® communicating, microprocessor-based current-to-pneumatic instruments with linkage-less, non-contact travel feedback.
Three important functions are performed by the DVC6200 instrument:
Traditional positioning of a control valve by converting the 4-20mA DC input signal from the process controller to a pneumatic output signal to the actuator.
Automatic calibration and configuration utilizing the power of microprocessor technology.
Communication capability via the HART communications protocol to provide instrument and valve diagnostic information.
This instrument provides one platform for any pneumatic actuator application.
The DVC6200 can be installed on sliding-stem, rotary, single- or double-acting actuatorsSpecification:DVC6200 digital valve controller or DVC6215feedback unit:
Integral mounting to FISHER 657/667 or GX actuators
Window mounting to FISHER rotary actuators
Sliding-stem linear applications
Quarter-turn rotary applications
DVC6205 base unit:
for 2 inch pipe stand or wall mounting (for remote-mount)
The DVC6200 digital valve controller or DVC6215feedback unit can also be mounted on other actuators that comply with IEC 60534-6-1, IEC60534-6-2, VDI/VDE 3845 and NAMUR mounting standards.
Communication Protocol
HART 5 or HART 7
Point-to-Point
Analog Input Signal: 4-20 mA DC, nominal; split ranging available
Minimum Voltage Available at Instrument Terminals must be 9.5 VDC for analog control, 10 VDC for HART communication.
Minimum Control Current: 4.0 mA
Minimum Current w/o Microprocessor Restart: 3.5 mA
Maximum Voltage: 30 VDC
Overcurrent protected
Reverse Polarity protected
Multi-drop
Instrument Power: 11 to 30 VDC at 10 mA
Reverse Polarity protected
Minimum Recommended:
0.3 bar (5 psig) higher than maximum actuator requirements
Maximum:
10.0 bar (145 psig) or maximum pressure rating of the actuator, whichever is lower
Medium: Air or Natural Gas
Supply medium must be clean, dry and noncorrosive.
Output Signal
Pneumatic signal, up to full supply pressure
Minimum Span: 0.4 bar (6 psig)
Maximum Span: 9.5 bar (140 psig)
Action: Double, Single Direct or Reverse
Independent Linearity
Typical Value: ±0.50% of output span
DVC6200
Aluminum:3.5 kg (7.7 lbs)
Stainless Steel:8.6 kg (19 lbs)
DVC6205:
4.1 kg (9 lbs)
DVC6215:
1.4 kg (3.1 lbs)
Construction Materials
Housing, module base and terminal box:
A03600 low copper aluminum alloy (standard)Stainless steel (optional)
Cover: Thermoplastic polyester
Elastomers:Nitrile (standard)
Fluorosilicone (extreme temperature)
DVC6200 digital valve controllers (figures 1‐1 and 1‐2) are communicating, microprocessor‐based current‐to‐pneumatic instruments. In addition to the normal function of converting an input current signal to a pneumatic output pressure, the DVC6200 digital valve controller, using the HART communications protocol, gives easy access to information critical to process operation. You can gain information from the principal component of the process, the control valve itself, using the Field Communicator at the valve, or at a field junction box, or by using a personal computer or operator's console within the control room. Using a personal computer and ValveLink software or AMS Suite: Intelligent Device Manager, or a Field Communicator, you can perform several operations with the DVC6200 digital valve controller. You can obtain general information concerning software revision level, messages, tag, descriptor, and date.
Product Parameters
| Brand Name | FISHER |
| Product Name | Valve Positioner |
| Model Name | DVC6200 |
| Tempreature | -40ºC~80ºC |
| Max Pressure | 145 PSI |
| Input Siganl | 4-20mA |
| Proof | Ex ia IIc T5 |
Packaging & Shipping
Packaging: Original cardboard box packaging
Company Profile
Company Profile
KERUI (weifang) Automation Equipment Co., Ltd. specializes in industrial automation instrument development, production and sales, technical services, and supporting equipment supply of specialized companies. The main products are flow meters, level meters, temperature meters, pressure meters, electrical meters, thermal intelligent meters, programmable controllers (PLC), DCS distributed control systems, and eight series of more than 1,000 specifications. Its products and technologies are widely used in electric power, metallurgy, petrochemicals, environmental protection, plastics, food, printing, tobacco, textile, dyeing, and other fields.
We can offer rosemount, Endress+Hauser, yokogawa, Siemens, FISHER,Koso, Samson, Abzil, Neles,UE etc, Brands.
If you need anything please feel free to contact me.
FAQ
Q: How long will you give me the reply?
A: We will reply to you as soon as we see the information
Q: What is the delivery time?
A:The products in stock will be shipped after receiving the payment, and the products that need to be ordered are subject to the factory time.
Q: How about your package?
A: Do not worry about the package, we have rich experience in packing.
Q: How about the payment terms?
A:You can choose T/T.
Q: What is the MOQ?
A:1PC.
Q: Can I get a lower price if I order large quantities?
A: Yes, cheaper prices with more bigger size orders.
Q:After sales and warranty?
A: We provide one year warranty lifetime technical support services.
){kind=link}